металообробні станки / розточувальні верстати і обробні центри / Багатошпиндельні свердлильні верстати
Виробник: DMG MORI
Модель:NLX 2500|700
Тип техніки: Багатошпиндельні свердлильні верстати
Номер позиції: 168624313
Кількість: 1
Дата: 30.01.2026
Місцезнаходження:
Німеччина
Ціна:
Seller-item-No.:071779
| General | |
| CNC Turning Centre; Control: Control M730UM with CELOS | |
| Characteristics | |
| Max machining diameter | 330 mm |
| Dimensions (L x W x H) | 3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) m |
| Drive power main spindle | 18,5/15 kW |
| Rapid feed X / Z | 30/30 m/min |
| Movements X / Z | 260/795 mm |
| Rotary tool spindle speed | 10000 rpm |
| Number of tool stations | 10 |
| Speed max. | 4000 rpm |
| Spindle bore | 111 mm |
| Bar diameter max. | 80 mm |
| Max. Turning Length | 705 mm |
| Weight approx. | 5820 Kg |
| CELOS - ERGOline Touch | CELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p |
| (Spindle1)KITAGAWA 10Hollow Chuck BR10A821(SK-OP) | (Left Spindle) KITAGAWA 10-inch Hollow Chuck BR10A821 Three-jaw hydraulic chuck manufactured by Kitagawa Iron Works. Chuck outer diameter: Ø254 mm (dia.10 inch.) Through-hole diameter: Ø81 mm Gripping diameter: Max Ø254 mm, Min. Ø31 mm Jaw stroke (dia |
| (Spindle1)Hollow Cyl.set KITAGAWA 10Hollow Chuck | (Left Spindle) Hollow Cylinder Set for KITAGAWA 10-inch) Hollow Chuck BR10A821 (Bar work capacity dia. 80 mm) (Without Chuck Body) Hollow cylinder and draw bar are included as a set. Chuck is not included. Please see the chuck-cylinder combination diagr |
| (Spindle 2) KITAGAWA 6in. Hollow Chuck BR06A521E | (Right Spindle) KITAGAWA 6-inch Hollow Chuck BR06A521E Three-jaw hydraulic chuck manufactured by Kitagawa Iron Works. Chuck outer diameter: Ø170 mm Gripping diameter: max Ø170 mm, min Ø16 mm Jaw stroke (diameter): 5.5 mm Plunger stroke: 12 mm Max allow |
| (Spindle2)Solid Cyl.set KITAGAWA 6Hollow Chuck | (Right Spindle) HOWA Solid Cylinder set for KITAGAWA 6 inch Hollow Chuck BR06A521E (without chuck body) Solid cylinder and draw bar are included as a set. Chuck is not included. Please see the chuck-cylinder combination diagram for the combination with |
| 12-st.bolt-tightened turret (standard specific.) | 12-Station Bolt-Tightened Turret (Standard Specification) (Y, SY, SMC) In-house 12 station turret. Please refer to the axis travel diagrams and turret interference diagrams for the movable region. Number of tool stations: 12 Shank height for square tool: |
| Alternating speed | Alternating Speed It can suppress regenerative chattering by fluctuating spindle speed. The cycle is automatically calculated only by setting the fluctuation width in the guidance screen. Regenerative chatter is created by excitation resulting from the |
| Islands, open pockets | Islands, Open Pockets Islands - The island shape can be defined in a pocket shape. Even complex tools path can be converted in shorter time. - Number of island shape definitions: 127 Open pocket - The island shape can be defined in an open pocket shape |
| Multi-counter display | Multi-counter display Multi counter display is used to control the number of machined workpieces. Each time the M2000 to M2020 commands written in a program are read, the counter increments the count. Register the setting values on the MULTI COUNTER scr |
| Chip conveyor (right discharge) | Chip conveyor (right D6152871 discharge, hinge type) (/700) Chips are loaded onto hinge type plate and discharged to outside of the machine. Effective in discharging long chips. Not suitable to discharge minute powdery chips generated when machining cast or gun |
| High-pressure coolant system 1 MPa (1,1 kW, 50Hz) | High-Pressure Coolant System (50Hz Area: 1 MPa (1.1kW)/60Hz Area: 1.5 MPa (2.2kW)) It improves the chip removing performance in cutting and the tool/workpiece cooling capability. The pump for supplying coolant to the turret is changed to the high-press |
| EtherNet/IP Interface | EtherNet/IP I/F I/F for exchanging control signals between the machine and peripheral equipment using the EtherNet/IP communication protocol. It is necessary for connecting the peripheral equipment that supports EtherNet/IP. The wiring is saved compare |
| Workpiece conveyor for workpiece unloader | Workpiece Conveyor for Workpiece Unloader (Built-In Type) (500) (/700) It receives a completed workpiece ejected from the workpiece unloader and discharges it to the right side of the machine. The conveyor operates in conjunction with the workpiece unlo |
| Chuck foot switch (double) for main/ sub spindle | Chuck foot switch (double) for main and sub spindle |
| IoTconnector | IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETservice) |
| NETservice | NETservice A software installed on IoTconnector for qualified support by Internet- based remote diagnostics |
| Machine Data Connector (MDC) | Machine Data Connector (MDC) A software installed on IoTconnector for uniform machine data interface as an integrated function of the DMG MORI Connectivity Hardware |
| Dry anchor | Dry Anchor The machine is fixed to the floor to minimize the movement due to vibration during operation or small earthquakes. Generally, factories with concrete 500 mm (19.69 inch.) or more in thickness does not require foundation work. However, please |
| 2018 | DMG MORI | NLX 2500 SY 700 | |
| 2019 | DMG MORI | NLX 2500 SY/700 | |
| 2018 | DMG MORI | NLX 2500 SY / 700 | |
| 2014 | DMG MORI | NLX 2500 SY / 700 | |
| 2020 | DMG MORI | NLX 2500/700 | |
| DMG MORI | NLX 2500|700 | ||
| 2017 | DMG MORI | NLX 2500 SY / 700 | |
| DMG MORI | NLX 1500|500 | ||
| DMG MORI | CTX 2500|700 | ||
| DMG MORI | CTX 2500|700 |
| 2015 | DMG MORI | NLX 2500/1250 Y | 189000 EUR | [Apr 2020] |
| 2015 | DMG MORI | Milltap 700 | 90000 EUR | [Mar 2017] |
| 2016 | DMG MORI | Milltap 700 | 54900 EUR | [Jul 2024] |
